1st Edition
Advanced Materials in Engineering Applications Proceedings of International Conference on Advanced Materials in Engineering Sciences
The formability features of sheets made of the alloy Al 8011 are examined experimentally and the results are compared with the numerical ones in this research. Through an axisymmetric finite element simulation of the Erichsen cupping test, formability characteristics were evaluated. The Erichsen cupping test was used to exam□ine the effects of several factors, including friction at the punch-sheet contact and sheet thickness. The nonlinear finite element method is used to calculate the dome height, stress, and strain values for the aluminum sheet, and the results are then compared to the numerical ones. The findings demonstrated that the Al 8011 alloy’s form□ability greatly rises with increasing sheet thickness. The formability is significantly impacted by the lubricant. The application of the finite element technique to forecast the formability of Al 8011 alloy.
1 Formability characteristics of Al 8011 alloy sheets
A. Mohan, R. B. Uppara, P. Jagadeesh, B. S. Navaneeth, R. K. Pandey, and
S. Muthukumarasamy
2 Minds and materials in flight: The dynamic duo of smart materials and
machine learning in aerospace evolution
Abhay Bhandarkar, Nagaraju Kottam, and D. Vishwachetan
3 A mini review on the production of biodiesel using photocatalysts
M. S. Akansha, S. Veluturla, G. Akshay, and V. Vijay Kumar
4 Comparative analysis of photoelectric properties on monolayer WSe2
and
MoS2
by Zn doping
A. Rushitha and S Dawnee
5 Prospective role of MoS2
in Zinc Nickel flow battery system: review
A. Preethi, S. Dawnee, and Victor George
6 Removal of iron in groundwater using nanobeads of ZnO synthesized from
Pseudomonas species
Gayathri Vijayakumar and P. Dhamodhar
7 Continuous production of monodisperse silver nanoparticles by droplet-based
microreactor system for catalysis in bioethanol production
R. Halima and Archna Narula
8 Analyzing the performance of dynamic factors of abrasive water jet cutting
and topography of ZA 27 alloy using L27 orthogonal array
S. Hamritha, G. S. Prakash, C. A. Niranjan, S. Akshaya, and P. Harshitha
9 Facile click approach for the synthesis of innovative 1,2,3-triazole derivatives
for structural determination and its characterisation
D. H. Harshitha, M. K. Kokila, M. R. Nithin Kumar, and B. Paul
10 Synthesis and characterisation of brass-Molybdenum composite
S. Jasper, N. Mohanrajhu, M. Durairaj, D. Vijayakumar, N. Muthuselvakumar,
and P. Chandramohan
11 Green synthesis, characterisation and antimicrobial activity of calcium
nanoparticles and their efficacy against drug resistant Streptococcus pyogenes
N. Ahalya, Gayathri Vijayakumar, P. Dhamodhar, and Idhaya Kumar
12 Preparation of papercrete bricks using agro wastes with a superficial layer of
microbially synthesised silver nanoparticles
K. Kannan, K. Sakthimurugan, and G. Pugazhmani
13 Bioabsorbable scaffold for bone tissue engineering applications
Roshni Ramchandran, Ananya N. Nayak, Keerthana D. Praveen, Anusha S. Shetty,
Divyashree T. K., and Lavanya Bhushan
14 Efficacy of dye removal using mesoporous silica nanoparticles synthesised from
coconut husk
R. Jayasree, M. Monica, and J. Irine Briny Hepzibha
15 Rapid solidification of aluminium alloys – a review
K. T. Kashyap, Lakshya Nahar, S. N. Nagesh, and C. Siddaraju
16 Enhancing wear resistance of aluminum alloy wheel hubs through aluminum metal
matrix composite (MMC) materials
S. Suthagar, Gooty Rohan, G. Boopathy, and N. Ramanan
17 A survey on hydrogen energy 142
V. S. Sukshith, K. L. Rajeev, S. H. Prashant, and S. B. Halesh
18 Machinability performance investigation and increasing tool life of TiAlN
K. Karthik, K. Bravilin Jiju, B. Madhu, N. Sathiyapriya, P. Duraimurugan, and
B. Murali
19 A comparative study on performance of RC beam retrofitted with CFRP sheets and
Nitowrap matrix
M. Nayana, B. Nagashree, R. Mourougane, and Manoj Vasudev
20 An experimental study on the influence of construction demolition waste and
sustainable materials on the properties of concrete
E. Gopichand, B. Narendra Kumar, and N. Karthik
21 Proactive restoration: an evaluation of structural health monitoring-driven
rehabilitation for reinforced concrete structures
D. Harun Kumar, B. Narendra Kumar, E. Gopichand, and N. Karthik
22 An Advanced Ballistic Military Helmet Incorporating Kevlar129/Kenaf/Sisal
Fiber/PALF-Fiber Orientation
B. Murali, B. Silambarasan, K. Sivasakthi Balan, M. Aiswarya, B. S. Navaneeth,
and K. Karthik
23 Intricacies in machining of titanium grade 5 alloy: a review
K. N. Mohandas, N. R. Acharya, and Nagahanumaiah
24 Experimental analysis on waste tyres for safest replacement in concrete
composites 198
S. Muthukumarasamy, M. Siva, K. Sivasakthi Balan, K. Rajkumar, Rakesh Kumar
Pandey, and A. Mohan
25 Exploring the SARS-CoV-2 NSP12 interaction interface: a computational drug
repurposing approach for COVID-19
S. Aarthy, S. G. Bhavya, Manjunath Dammalli, M. Adithya, and M. Keerthana
26 Packed bed column studies on denitrification of water using immobilised modified
kaolin 221
Bhagyeshwari D., Chalageri, Rajeswari M. Kulkarni, Archna N. Anju Maria Mathew,
Ishani Agrawal, Neha P. S. Rao, and Sandeep P. Raman
27 A study on theoretical and experimental investigations on hybrid composites
subjected to low velocity impact tests
R. S. Shilpa and R. Jyothilakshmi
28 Recent progress in multifunctional transition metal di-chalcogenides and their
applications
V. S. Kavyashree, D. L. Shruthi, and G. N. Anil Kumar
29 Fabrication and evaluation of composites with an aluminium metal matrix for
wire electrical discharge machining parameters
S. Jayavelu, J. Udayaprakash, S. Ganesan, C. Rajkumar, N. Kumaran, and
Prem G. Roshan
30 Effect of strain rates on short glass fiber reinforced thermoplastics 254
S. Jayavelu, SaralaRuby, S. Ganesan, Prem G. Roshan, C. Rajkumar, and N. Kumaran
31 Hydrogen storage in MOFs: a machine learning approach
Yash Misra, Meeradevi, Sindhu Pranavi, B. J. Sowmya, Darshan Bankapure, and
Spandana S. Mentha
32 Minimization of armature shaft deflection in micro dc motor using sintered stainless
steel collar followed by FEA
Dharmalingam G, N. Srinivasan, and Vishal Naranje
33 Development of banana fiber-reinforced composite materials for small
windmill blade
M. Venkatasudhahar, P. B. Senthilkumar, G. Dharmalingam, and G. S. Sibikannan
34 Corrosion resistant coating techniques to prevent silver corrosion in solar panels: a
review
J. Hemanth Kumar
35 Review on role of solar energy, exploring into photovoltaic technology: various
fabrication methods and characteristics of solar cells
Koteswara Rao Jammula, Abdul Azeez, Akshay Kumar, G. M. Madhu, Jitin Bangera,
and Ritesh H. Shetty
36 Optical anisotropies in Co/Fe doped single-walled carbon nanotubes: A theoretical
approach
Seema Aggarwal and Monica Anand
37 Investigating the effects of wire diameter and power input on surface roughness in
wire EDM of SAE 4130
G. Narendranath,
and J.Udaya Prakash
38 Performance of hot mix asphalt using nano-clay modified binder and polypropylene
fiber
Shreyash Sachin shinde, Abdulsajid Ganiahamad Gavandi, Vivek Vijay Koli, and
Pinki Deb
39 Sustainable Mirabilis jalapa-derived zinc oxide nanoparticles: synergistic
bioactivity in antimicrobial, anticancer, and antioxidant
G. K. Prashanth, Manoj Gadewar, Srilatha Rao, H. S. Lalithamba, S. H. Prashant,
M. Mahadevaswamy, N. P. Bhagya, and B. M. Nagabhushana
40 Spectroscopic characteristics and photoluminescence studies of Li+
co-doped Zn2
SiO4
: Eu+
nanophosphors
K. N. Prathibha,*, B. V. Nagesh, and R. Hari Krishna
41 Investigation of CNT-enhanced aluminum matrix composites for high-wear resistance
and self-lubrication
P. Gurusamy, G. Boopathy, G. Balaji, and N. Ramanan
42 Next generation industrial automation and cloud systems – a review
M. S. Rishikesh, Praveen Sai, and Prashanth S. Humnabad
43 Design analysis of electric vehicle for E-commerce application
S. M. Sanjay Kumar, M. R. Praveen Kumar, A. Harshith, B. T. Naveen, R. Pavan,
and M. Prasanna
44 An engineering comparison for suitability of PLA material for light engineering
activity using FEA simulation techniques
V. N. Shailaja, M. Rajesh, M.Appaiah, M. R. Deepthee, and B. Ravishankar
45 Effect of alloying elements on mechanical properties of LM6 alloy on addition
of magnesium, copper and zinc
V. Ashith Raj, M. R. Shivakumar, M. Shilpa, Murali Krishna Panchagam, and
B. Sanath Kumar
46 Process automation and smart manufacturing
K. Srujan, D. Tejesh, and Prashant S. Humnabad
47 Strength and microstructural behaviour of areca nut fiber and laterite sand-based
sustainable concrete
R. Vijayasarathya
, Asha Waliitagi, and K. Chandana
Biography
N. V. R. Naidu
Chief Editor Dr. N. V. R. Naidu is currently serving as Principal at M S Ramaiah Institute of Technology, Bangalore, India. With over 42 years of experience in academia and Research. Dr. Naidu academic journey includes B.Tech. in Mechanical Engineering, M.Tech and Ph.D. in Industrial Engineering from Sri Venkateshwara University. He has received Dr. J Mahajan Award (2008–09) from the Indian Institution of Industrial Engineering. Throughout his illustrious career, he has held pivotal roles such as Dean Faculty of Engineering and Executive council Member at Visvesvaraya Technological University, reflecting his dedication to the advancement of academic excellence. He is serving on various academic boards and contributing his expertise to prestigious institutions in the field of Engineering. Dr. Naidu’s expertise extends to research, evident in his 140+ published papers in prestigious national and international journals and conferences. He contributes as a reviewer for reputable journals and has chaired sessions at various conferences. Dr. Naidu has authored nine textbooks spanning Management, Total Quality Management, and Operations Research. Dr. Naidu has significantly impacted academic research, guid□ing seven doctoral candidates in areas like robust design and supply chain networks and he is adjudica□tor for PhD theses across India. His international engagements in countries like the USA, Japan, and Canada have enhanced industry-institution interactions. He has executed numerous funded programs and projects, advancing academia and industry collaboration.
G. M. Madhu
Editor Dr. G. M. Madhu is currently working as a Professor at the Department of Chemical Engineering and serves as the IQAC Coordinator at M S Ramaiah Institute of Technology, Bangalore, India. He holds degrees in Chemical Engineering at the undergraduate, postgraduate, and doctoral levels. With twenty□three years of experience in both research and teaching, his expertise lies in nanomaterial synthesis and applications, water purification technologies, and nano composites. Dr. Madhu has contributed signifi□cantly to academia, having authored 105 papers in peer-reviewed national and international journals, as well as presenting 65 papers at national and international conferences. His research endeavours have been supported by funded projects from government and non-governmental agencies. Under his mentorship, ten students have successfully completed their PhDs, while two students have attained M.Sc. Engineering degrees. Currently, Dr. Madhu is supervising five students pursuing their PhDs. He had delivered numerous invited talks at both national and international conferences. Dr. Madhu is an esteemed life member of IIChE, IEI, InDA, and IAENG.
Nagaraju Kottam
Co-editor Dr. Nagaraju Kottam is currently working as an Associate Professor in the Department of Chemistry, Ramaiah Institute of Technology, Bengaluru. He has obtained his PhD in Physical Chemistry from Central College, Bangalore University. His research interests include the design and development of advanced nanomaterials and their composites for wastewater treatment, hydrogen generation, electro□chemical, and biosensors applications. He has to his credit more than 75 research publications in ref□ereed international journals, 06 Patents, 03 book chapters. He has guided 09 Ph.D’s for their doctoral degrees and another 02 are on-going in which one is DST-Inspire fellow. He has mentored more than 15 UG/PG projects and the majority have received best project awards. Recently, received as the best innovative project award of the year 2024 and 2020 from KSTA and KSCST, Bengaluru. He earned some government/institutional-funded projects and received several prestigious awards including the “Award of Excellence in Teaching” from MSRIT for the year 2018–19 for his contribution to research and teaching. There is on-going institute level DST-FIST program. He had reviewed more than hun□dred articles in international journals and was awarded the Outstanding Reviewer award from an Elsevier journal and also served as guest editor for a few journals. Dr. Nagaraju was a recipient of the INSA-IAS summer research fellowship in 2014. He was also nominated as an expert member for evaluating Switzerland’s government-funded project in 2020.
G. N. Anil Kumar
Co-editor Dr. G. N. Anil Kumar is working as Assistant Professor in the Department of Physics, Ramaiah Institute of Technology. He has obtained his PhD in chemical crystallography from Bangalore University in 2012. His Research interests include Single crystal and Powder x-ray diffraction studies on organic & inorganic materials, Co-crystal design and ab-initio studies of solids. He has published 50 research articles in international peer reviewed journals and completed an external funded project